Evacuate - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
11
Operating Instructions Fire alarm system EBL512 V2.3.x

Evacuate

This function is only valid for the Belgian, British Standard,
Hungarian and Ukrainian conventions (S/W version > 2.2.3). A front
with the push button "Evacuate" (P5) is also required. As from
version 2.3.x one programmable input per c.i.e. can, as an alternative,
be used to turn ON "Evacuate" function.
When the push button "Evacuate" (P5) is pressed
programmed for sounders (type 3 = alarm devices), will be collective
turned ON (steady). This is indicated by the following information in
the alphanumeric display:
Evacuate in progress
The sounders will remain turned ON until they are turned OFF by
pressing the push button "Evacuate" (P5) again.
NOTE! The alarm devices (sounders) will always be activated steady
(sound continuously) irrespective of the fact that the outputs can be set
to anything else for fire alarm (e.g. intermittent).
27
Alt. when a programmable input is activated.
28
Alt. when the programmable input is de-activated.
28
27 24
, all outputs ,
28