Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
Rev: 1
10
Operating Instructions Fire alarm system EBL512 V2.3.x
Disable / Re-enable all control,
extinguishing and ventilation
outputs
All control outputs programmed as type:
0 = control (general)
1 = fire ventilation
2 = extinguishing system
... can via menu H2/B8 be collective disabled for one, more or all
control units. This is indicated by LED "Disablements" (L8).
They will remain disabled until they are re-enabled again via menu
H2/B8.
See also chapter "Disable / Re-enable all control, exting. and
ventilation outputs (H2/B8)", page 85.
26
Also the "Extinguish equipment output" on the German FBP interface
board 1583.
27
26