Functions used when receiving calls
Step by step
Speaker
MAILBOX
MAILBOX
56
Activating receipt of an Internal MWI
When a subscriber group is programmed as a VMIe
group Interface, it becomes a voice mail subscriber
group that can be activated for signaling the moment a
new message is waiting (see Programming an exten-
sion - VMIe group Interface in the programming manu-
al). This is the only group with permission to deactivate
the internal MWI.
n
Lift the handset.
qjl
Enter the code to enable "receiving internal MWI". (*68)
or
rjl
Enter the code to deactivate "receiving internal MWI".
(#68)
p
Enter the extension number assigned to the mailbox
(e.g., 12/102).
t
Replace the handset.
Mailbox access
To access your mailbox, call the direct access number
(Voice mail subscriber group) and follow the voice mail
system prompts.
You can also do the following:
•
Record/Change a greeting announcement to be
played when there is a call.
•
Listen to the messages left in your mailbox by call-
ers.
n
Lift the handset.
or
Press this key. The LED comes on.
or
Select this key.
[1] When all mailboxes of the Internal voice mail system are busy, the
call is forwarded to the UCD subscriber group queue assigned to
voice mail.
Remember: It is not possible to transfer calls to the voice mail sys-
tem.
1