When There Is No Answer; For Fax/Did - Siemens HiPath 1100 User Manual

Functions used when receiving calls
Step by step
50
p
Enter the number for accessing an external line:
1. For example, 0;
2. A group of external lines (e.g., 890).
w
Wait for a dial tone.
p
Enter the number you want to call.
w
Wait for a confirmation tone.
t
Replace the handset.

When there is no answer

The call forward no answer feature allows rerouting a
call made to a specific extension to another extension,
a voice mail subscriber group or an external number, af-
ter a specified timeout that can be pre-programmed or
if busy.
n
Lift the handset.
qeh
Enter the code for internal call forwarding. (*14)
p
Enter the number for the
1. Extension you want to call (e.g., 11/101).
2. UCD subscriber group for voice mail (e.g., 790).
3. Call group (e.g: 770)
4. Access to an external line (e.g., 0) and the external
destination number.
w
Wait for a confirmation tone.
t
Replace the handset.

For Fax/DID

When a Fax/DID module is installed, calls can be for-
warded to Auto-answering mode.
n
Lift the handset.
[1] The call rings at the destination extension until the preset timeout
expires (see Programming manual, Programming an extension -
call forward no answer) or is forwarded immediately if busy.
[2] For further information about the Fax/DID module, see Fax/DID
Auto-answering mode in the Programming manual.
1
2