Siemens HiPath 1100 User Manual page 45

Step by step
ACCOUNT CODE
r
If the account code has not been configured using Hi-
Path 1100 Manager or the option to validate the account
code is deactivated, this key closes the sequence of
digits if the code has fewer than 10 digits.
If the account code has been configured using HiPath
1100 Manager and the option to validate the account
code is activated, this key should not be used.
p
Enter the code to access an external line (e.g., 0) and
the external number you want to call.
w s
Wait for the call to be answered. Start conversation.
Incoming external calls (optional)
Required: During the conversation.
Press the account code key.
p
Enter the account code (a sequence of up to 10 digits
from 0 to 9).
r
If the account code has not been configured using Hi-
Path 1100 Manager or the option to validate the account
code is deactivated, this key closes the sequence of
digits if the code has fewer than 10 digits.
If the account code has been configured using HiPath
1100 Manager and the option to validate the account
code is activated, this key should not be used.
s
Proceed with the conversation.
It is also possible to configure the system so that
it is either mandatory or optional to enter an ac-
count code at the start of the call. These settings
can be configured using HiPath 1100 Manager
(see Account codes - A31003-K1160-B810-*-*) or
programming code (see Programming Manual,
A31003-K1160-B804-*-*, Account code type).
The account code can be configured in advance
using HiPath 1100 Manager (see Account codes
- A31003-K1160-B810-*-*). If it has been config-
ured and the option to validate the account code
is selected, only the configured codes will be ac-
cepted. If an invalid account code is typed in, a
negative tone will sound or a message will be
displayed.
Features used during Call
45