48/64
Maintenance and repair
Please note:
To replace the transmission,
belt section BS 2/CH-HQ2,
BS 4/C-HQ4 for the
transverse conveyor of the
lift unit must be removed.
Required tools
• Hex socket wrench, size 3
• Hex socket wrench, size 4
• Hex wrench, size 8
• Hex wrench, size 10
• Hex wrench, size 13
Preliminary steps
Allow the belt section to
run briefl y and position
the fl at-top plate with hole
(A, chain coupling position)
on the drive sprocket.
Now deenergize and
depressurize the system,
and secure it against
being reactivated.
1.
Remove the motor.
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
10.4.3
Replacing the transmission, internal motor mounting
4x
1
SW8
M
D
Fig. 29:
Preparation and removing the motor
=20 Nm
1
A
551 261-27