Residual Risks - Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

38/64 Commissioning
Table 13: Residual risks
Location
1 Entanglement zone near
drive and return unit
(reversible operation)
2 Between fastening plate
and belt section during
lifting
3 Between HQ drive shaft
and workpiece pallet
4 Between joint/main
section profi le and
workpiece pallet
5 Between HQ damper and
workpiece pallet
6 Between front and back
belt section profi le/
stop gate carrier and
workpiece pallet (WT
moves toward main belt)
7 Between top of HQ and
bottom of belt section
profi le
8 Motor
1
T.R.
4
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12

8.2 Residual risks

Situation
Clothing or long hair can
become entangled
Body parts can become
pinched
Body parts can become
pinched
Body parts can become
pinched
Touching hot surfaces
above 65 °C
2
7
8
5
551 261-21
Danger Action
Crush injury Keep hands out of running systems. Wear
Hair can be protective clothing.
pulled out
Crush injury Keep hands out of running systems. Secure the
danger zone adequately.
Shearing Danger zone is in work area or at transport
speeds > 15 m/min
Must be eliminated, e.g., by a guard.
Shearing Danger zone must be eliminated, e.g., by a guard.
Burning Install appropriate guards.
Let the unit cool down at least 30 minutes before
performing maintenance and/or repair tasks.
551 261-19
3
551 261-20
6
551 261-22