Replacing The Transmission, External Motor Mounting - Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

Required tools
• Hex wrench, size 8
• Hex wrench, size 13
1. Remove the motor.
2. Remove the
transmission.
3. Remove the plugs and
insert them in the new
transmission.
4. Install the new
transmission.
5. Install the motor.
Please note:
• The end faces of the
motor and transmission
must be undamaged.
• The transmission hub
comes lubricated with
anti-seize lubricant.
• Do not tilt the motor
and make sure it has the
necessary clearance area
for installation.
• Install the motor in
the proper orientation
(terminal box) and
connect it to the
transmission.
• If the motor is not in the
proper orientation: Do
NOT rotate the motor.
Disconnect the motor
from the transmission
and reconnect it.
10.4.2

Replacing the transmission, external motor mounting

Fig. 28: Replacing the transmission, external motor mounting
3 842 358 792/2016-12, Material and information fl ow technology: HQ 2/C-H, HQ 4, Bosch Rexroth AG
Maintenance and repair
2 4
2x
SW13
M =25 Nm
D
2
5
4
1
47/64
1 5
4x
SW8
M =20 Nm
D
3
551 261-26