Replacing A Fan Drive - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Exercise caution because the device is still energized after it is shut down on the
controller home screen.
Step 2 Remove the adjustable side panels for the compressor drive.
Step 3 Remove all cables from the drive and cut the cable ties using diagonal pliers.
Step 4 Remove the four screws on the drive using a Phillips screwdriver, and pull out the
drive.
Figure 8-29 Removing a drive
Step 5 Install the new drive.
Step 6 Connect the cables to the drive.
Step 7 Install the adjustable side panels.
Step 8 Power on the smart cooling product, and choose Maint > Wizard Startup on the
home screen. Start the compressor and check that the compressor works properly
and the smart cooling product generates no alarms. Check that the smart cooling
product works properly before you exit.
----End

8.4.16 Replacing a Fan Drive

Prerequisites
●
●
Issue 01 (2021-01-30)
NO TICE
A drive needs to be replaced.
A spare drive of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
172