Table of Contents
Advertisement
Programming
STEP 1:
ASYD - System Data 1, Index 59, Bit 0. Should the system restrict incoming calls during LINE LOAD
CONTROL? 0/1: No/Yes.
Incoming calls terminated to CCIS/ISDN cannot be restricted.
Note:
STEP 2:
ANPD - Reserve a number level for feature access and cancel. Assign Connection Indexes, CI = N, H,
B; Normal (N), Hooking (H), and Busy (B) (applicable to any feature assigned to this level). Assign
NND in accordance with a predetermined numbering plan.
STEP 3:
ASPA - Assign an access code to LINE LOAD CONTROL. Assign SRV = SSCA (Service Code
Appendix), SIDA = 46 for Line Load Control Start. Assign SRV = SSCA (Service Code Appendix),
SIDA = 47 for Line Load Control Cancel. Assign a Connection Index, CI = Normal (N).
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI 16 to the stations that will be unaffected by
LINE LOAD CONTROL.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Line Load Control
L-11
Page 447
Advertisement
Table of Contents
