NEC NEAX2400 IPX Programming Manual page 409

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

F-31
Service Conditions (cont'd)
12.
When this service is activated, the key information of D
will be changed automatically. For example:
Station A
-My Line 200
Station A
-My Line 202
-My Line 203
13.
If the multi-line LED of D
immediately after the service is activated. The LED light normally after the user goes on-hook.
14.
For the stations that belong to the following service groups, this service is available only for those stations
belonging to the same group.
CALL PICKUP
CALL PARK
STATION HUNTING - CIRCULAR
STATION HUNTING - TERMINAL
UCD
In case of STATION HUNTING - SECRETARIAL [S-8], the function as the secretarial station does not swap
Note:
even when the station swaps. (The secretary station is not considered as a member of the hunt group.)
15.
When following station activates this service, its destination station is not swapped.
a.) Station where following services are set:
• CALL FORWARDING - BUSY LINE set by the system
• CALL FORWARDING - DON'T ANSWER set by the system
• CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]
b.) Predetermined station for HOTLINE [H-1]
c.) Predetermined station for OFF-HOOK ALARM [O-6]
d.) DIRECT-IN TERMINATION (DIT) [D-7] station
term
16.
If D
has individual terminal data assigned, this service is available for D
data.
17.
This service is not available for:
term
a.) D
with OAI service key.
b.) ACD agent console and supervisory console.
term
c.) D
with CALL WAITING LAMP - UCD [C-76].
18.
This feature cannot be activated between D
may be cases where the incoming call cannot be answered or some services cannot be activated, due to
lack of line/feature keys. In this case, the data can be restored by activating the service again or by
exchanging the terminal sets.
19.
When activating this service, the terminals cannot be exchanged. (There may be some inconvenience if
number of Speed Calling keys, etc. differ between the terminals.)
Page 366
Follow Phone
Station B
-My Line 202
-My Line 203
Station B
-My Line 200
term
is lit (busy) when the station swaps, the line LED key may not light
term
s of different types. When different D
term
, which has the target station as a multi-line
Station C
-My Line 203
-My Line 202
Station C
-My Line 203
-My Line 200
[C-7, 30]
[C-29]
[S-7]
[S-9]
[U-1]
term
s with identical terminal
NEAX2400 IPX Feature Programming Manual
term
s are used, there
NDA-24297, Issue 1

Advertisement

Table of Contents
loading

Table of Contents