Table of Contents
Advertisement
B-6
B-6
General Description
This feature provides a HOT LINE [H-1] function for D
Operating Procedure
term
To access from D
1.
Lift handset or press the SPEAKER key.
2.
Press sub-line key associated with the predetermined desired station. The destination station is
automatically dialed; Ringback tone is heard, the destination station answers.
3.
After completion of conversation, hang up or press the SPEAKER key.
Note:
To make another HOT LINE [H-1] call instantaneously, press another sub-line key without going on-hook
and off-hook.
4.
If the desired station is busy - While hearing busy tone, press the EXECUTIVE RIGHT-OF-WAY
(OVER) key; receive warning tone. The caller can override the call in progress.
Service Conditions
1.
One of the line/feature keys must be assigned as a My Line.
2.
A station to be set Hot Line (calling party) cannot belong to Hunt [S-7, 8, 9] or UCD [U-1] group.
3.
Single line station or virtual lines (SOFTWARE LINE APPEARANCE [S-33]) can be assigned as a
BROKERAGE HOT LINE destination. (ISDN terminal cannot be assigned as the destination.)
4.
When a Hot Line call is made from a D
doesn't show the SERVICE DISPLAY [S-25] of hot line.
5.
This hot line feature is applicable for intra-office connection within the system.
6.
My Line of a D
7.
Destinations must be stations or an ATTENDANT CONSOLE [A-3] of the system.
8.
When a destination is an ATTENDANT CONSOLE [A-3], the Hot Line call terminates as an ATND call.
9.
ATTENDANT CAMP-ON [A-1], EXECUTIVE RIGHT-OF-WAY [E-1], CALL WAITING [C-31] and
CALL BACK [C-1] can be prohibited to the hot line connection through CLASS OF SERVICE -
INDIVIDUAL [C-15].
10.
When a destination station is busy, STEP CALL [S-13], CALL BACK [C-1], CALL WAITING [C-31],
or MESSAGE REMINDER - D
11.
Station Hunting works if the destination station is in a hunt group.
12.
UCD function works if the destination station is a UCD station, but busy tone is given if all the UCD
stations within the group are busy (no UCD queuing).
13.
CALL FORWARDING [C-2, 3, 5] is allowed if the destination station has set Call Forwarding, but CALL
FORWARDING - OUTSIDE [C-28] cannot be provided.
14.
Overriding is available only via the OVER key on D
receives reorder tone.
15.
In the following cases, overriding by the OVER key is not available, and the caller receives reorder tone.
a.) the conference-function trunks are all busy.
b.) the destination station is not engaged in a two party call, as when
•
call is terminating to the destination station.
•
the destination station has a call on hold.
Page 88
Brokerage - Hotline
Brokerage - Hotline
term
cannot be assigned as a Hot Line feature button.
term
[M-19D] cannot be activated.
term
.
term
term
, the D
's display shows the destination station number but
term
. If switch hook flash is attempted, the caller
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
