Table of Contents
Advertisement
3-4. Replacing the Main Parts
3-4-5. HDD Unit
Removal
1. Remove the top plate B. (Refer to Section 3-2-2.)
2. Open the lock lever in the direction of arrow A and
remove the HDD unit from the slot gently.
n
When placing the removed HDD unit, place it on a
cushion gently with the WARRANTY label side
facing down.
Lock levers
A
FRONT
3-10 (E)
A
WARRANTY label
(yellow)
Installation
1. Attach the HDD No. label that has the same number as
that of the removed HDD unit, to the new HDD unit
(supplied with HDD unit).
n
The HDD No. label shows the slot number to which
the new HDD unit should be installed.
HDD No. label
2. With the lock lever of the HDD unit fully opened,
insert the new HDD unit gently into the slot.
3. Close the lock lever in the direction of the arrow to
secure the new HDD unit.
Lock lever
HDD unit
Lock lever
HDD unit
m
. Do not install the HDD unit with the WARRANTY label
facing to the right when viewed from the front.
. Be careful not to give mechanical shock to the HDD
unit.
WARRANTY label
(yellow)
Locked
Released
MAV-555A
Advertisement
Table of Contents
