Table of Contents
Advertisement
1-2. Acquiring the Logs
Acquiring the log file
When the procedure to save the logs is performed, the log file is saved in the /home/setup/log folder of
the gateway PC. The other PC can acquire this log file using FTP.
(example : Acquiring the log file from a Windows PC)
1. Start up the MS-DOS prompt (or command prompt).
2. Enter [ftp 192.168.0.1]. (Enter the IP address of the gateway PC in the underlined characters.)
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
D:\>ftp\192.168.0.1"
3. When your PC is connected to other PC with ftp and the user name entry prompt is returned, enter
user: [setup] and password: [setup].
Connected to 192.168.0.1
220 192.168.0.1 FTP server (Version 6.00LS) ready.
User (192.168.0.1:(none)) : setup"
331 Password required for setup.
Password : setup"
230 User setup logged in, access restrictions apply.
ftp>
4. Enter [cd log] to move to the /log directory.
ftp> cd\log"
250 CWD command successful.
ftp>
5. Enter [ls] and confirm the log file as shown below.
ftp> ls"
200 PORT command successful.
150 Opening ASCII mode data connection for 'file list'.
g2xlog-20021022-0.tgz
226 Transfer complete.
ftp: 184 bytes received in 0.01Seconds 18.40Kbytes/sec.
ftp>
6. Enter [bin] to select the binary mode.
ftp> bin"
200 Type set to I.
ftp>
1-8 (E)
MAV-555A
Advertisement
Table of Contents
