Table of Contents
Advertisement
1-1. Installation Procedure
Installation procedure of this unit is shown on the follow-
ing flowchart.
Refer to each section about detail of each flow.
The operation manual is also required to do * - marked
items.
Start
Determination of
installation place
Unpacking
n
When the unit is transported, it is required to pack the unit into the specified packing materials.
Rack mounting
*Connection
*Initial setup
*Operation check
n
If an error message appears on the time data display area, refer to "Section 3. Error Message".
End
DNW-A22/A22P
Section 1
Installation
1-3. Operating Conditions
1-4. Power Supply
1-5. Installation Space
1-6. Rack Mounting
1-7. Matching Connectors and Cables
1-8. Signal Inputs and Outputs
1-9. Switch and Shorting Plug Settings on PC Boards
1-10. Switching Search Dial Mode
1-2. Supplied Accessories
Screws for rack mounting (PSW 4 x 16) .......................... 4
Operation manual .............................................................. 1
Maintenance manual (Part 1) ............................................. 1
1-1
Advertisement
Table of Contents
