Sony EVI-D100 Service Manual page 49

13. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproduc-
ibility will be poor.
Subject
Filter
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
m
* 1 : Perform "Auto White Balance Standard Data Input"
before this adjustment.
* 2 : The right two digits of the display data at the right
bottom side of TV monitor is the object data.
00 00 XX
Adjusting method
1) Place the C14 filter for color temperature correction on
the lens.
2) Select page: 0, address: 01, and set data: 01.
3) Select page: D, address: 11, and set data: 02, and press
the PAUSE button of the adjusting remote commander.
4) Select page: 2, address: 01, and set data: 3F, and press
the PAUSE button of the adjusting remote commander.
5) Select page: 0, address: 03, and set data: 04.
6) Select page: F, address: 3A, and change the data, and
adjust the average value of the DDS display data(* 2)
to the R ratio specified value.
7) Press the PAUSE button of the adjusting remote
commander.
8) Select page: 0, address: 03, and set data: 05.
9) Select page: F, address: 3B, and change the data, and
adjust the average value of the DDS display data(* 2)
to the B ratio specified value.
10) Press the PAUSE button of the adjusting remote
commander.
Processing after Completing Adjustments
1) Select page: D, address: 11, and set data: 00, and press
the PAUSE button of the adjusting remote commander.
2) Select page: 2, address: 01, and set data: 00, and press
the PAUSE button of the adjusting remote commander.
3) Select page: 0, address: 03, and set data: 00.
4) Select page: 0, address: 01, and set data: 00.
EVI-D100/EVI-D100P
Clear chart
(Color bar standard picture frame)
Filter C14 for color temperature
correction
DDS display of TV monitor (* 2)
F
3A, 3B
R ratio: 2B40 to 2BC0
B ratio: 5E40 to 5EC0
Object data
2-25