The System Tab - HP 9000 Manual

• Product List: Double-click on a product in the list to select (highlight)
it and to toggle its "marked" status ("Yes" or "No"). You can also use
the
Mark/Unmark Selection(s)
selected item.

The System Tab

You can choose not to set any system parameters for the system during
this installation. During the first boot of the target system, a parameters
screen will collect this information.
You will see a choice selection allowing you to set parameters now, or at
first boot of the target system. If you choose to set these parameters now,
you will see the following:
Chapter 5
Installing from the Ignite-UX Server
Configuring the Installation
button to toggle the "marked" status for a
97