HP 9000 Manual page 74

Configuring an Ignite-UX Server
Setting Up an Ignite-UX Server
This data can also be configured from a command line by using the tool
setup_server(1M) for this procedure. Or you can directly edit the
instl_boottab file; this is necessary in order to modify the listing of
existing IP addresses.
See the instl_bootd(1M) man page for further details.
DHCP Address Range First ensure that these IP addresses are not assigned elsewhere. These
IP addresses are used during the OS download and application loading.
The addresses are in use for most of the Ignite-UX download to a target
machine. One address is required for each simultaneous download. You
should set more, if the addresses are assigned permanently. For the
details of DHCP and the setup procedure, see Appendix A, "Configuring
for a DHCP Server."
The provision of DHCP capability is for the purpose of installation only
and you may want to limit configurations so that they do not interfere
with prior DHCP server functions. See "Examples of DHCP Usage", in
Appendix A,for more examples of usage situations.
Also see Appendix A, "Configuring for a DHCP Server," and the
setup_server(1M) and instl_adm(4) man pages for more information on
setting up DHCP functions.
74 Chapter 4