HP 9000 Manual page 43

b)
s)
a)
x)
?)
Select from menu:
When the actions menu shown above appears, do the following:
• Press s
Older Series 700
Search Results
Figure 3-4
=========================================================================
Searching for Devices with Bootable Media.
To terminate search, press and hold the ESCAPE key.
Device Selection
P0
P1
P2
Enter boot selection, (h)elp, or e(x)it:
===============================================================================
You will see a list of "Pn" selections, as above.
If your boot device does not appear in the search list, do the following:
1. Check the hardware.
2. Press x
3. Type s
4. At the prompt "Enter boot selection", enter the "Pn" device
If you know the SCSI address of the device beforehand, you can skip the
search and simply type the following at the "Select from menu"
prompt:
b scsi.x
Chapter 3
Boot from specified device
Search for bootable devices
Enter Boot Administration mode
Exit and continue boot sequence
Help
, to start a search for bootable devices.
Enter
Device Path
scsi.6.0
scsi.3.0
scsi.0.0
.
Enter
to initiate another search.
Enter
selection for the device containing your install media.
Booting the Target System
Device Type and Utilities
HP 2213A
IPL
HP HP35480A
IPL
TOSHIBA CD-ROM XM-3301TA
IPL
Installing From Media
43