During Installation And Configuration Of Ignite-Ux Tools And Data127 - HP 9000 Manual

During Installation and Configuration of
Ignite-UX Tools and Data
Table 6-3 Running swinstall
Chapter 6
Message(s) or
Behavior
swinstall cannot
read the tape. For
example you may see
the following:
Source connection fai
led
for "ignitesvr:/dev/r
mt/0m".
Failure reading the
contents of the tape.
Possible Cause
Wrong device file
No device file present
for the tape.
Troubleshooting
Likely Problem Areas
Fix
Use the Actions menu
in the SAM Peripheral
Devices/Tape Devices
area to show the device
files for the tape drive.
Use the Actions menu
in the SAM Peripheral
Devices/Tape Devices
area to create the
device files for the
tape drive.
127