External Offset Settings: Ofc - Panasonic LP-GS Series Serial Communication Command Manual

3-11-6 External offset settings: OFC

Sets input methods between I/O or SEO command for "External Offset Function" to adjust the marking position and laser
power for the entire file data.
⿎ Setting request data / response data for readout
Start
OFC
code command
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
OFC
code
⿎ Data description
Data length
Name
[byte]
Input method
Total data length
Reference
• Characters specified by SIN command and external offset function with I/O cannot be set together in one file.
• Registered characters (via I/O) and "Using SEO command" setting in external offset function cannot be set together in
one file.
• External offset function cannot be used with on-the-fly marking at regular intervals or on-the-fly marking with multiple
triggers.
⿎ Example of command settings
Condition: Input method = 2
• Setting
Transmission data
• Readout
Transmission data
Response data
Sub [Input method]
1-byte
R (Check sum)
Data contents
"0": OFF
"1": Low 4-bit
1 "2": Low 8-bit
"3": Low 10-bit
"4": Using SEO command
1 The data length is fixed.
[STX] OFC
[STX] OFC
[STX] OFC
(Check
End code
sum)
End code
It is the input method (I/O or communication
command) of the offset value.
S 2 [CR]
R [CR]
A 2 [CR]
ME-LPGS-SR-5
Remarks
131