File Settings: Alc - Panasonic LP-GS Series Serial Communication Command Manual

3-11-4 File settings: ALC

Adjusts the marking position and layout for each file. These settings are applied to all marking data in the selected file.
⿎ Setting request data / response data for readout
Start
ALC
code command
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
ALC
code
⿎ Data description
Name Omit
X-movement Y
Y-movement Y
Z-movement Y
Rotation
Y
movement
Y-axis mirroring Y
X-axis mirroring Y
Total data length
* Setting request data are variable length.
⿎ Example of command settings
Condition: X-movement = 10, Y-movement = -5.5, Z-movement = -2, Rotation movement = 120,
Y-axis mirroring = 0, X-axis mirroring = 1
• Setting
Transmission data
• Readout
Transmission data
Response data
Reference
• When any of the data item is omitted, the data set last (the initial value if it was not set) will be maintained for the omitted
field.
[X-movement], [Y-movement], [Z-movement],
Sub [Rotation movement],
[Y-axis mirroring], [X-axis mirroring]
R (Check sum)
Data
length
[byte]
Max. 8*
"-999.999"–"+999.999" [mm]
Max. 8*
Model
LP-GS051
LP-GS052
Max. 8*
LP-GS051-L
LP-RC350S
LP-RF200P
Max. 8* "-180.000"–"+180.000" [°]
"0": Do not invert
1
"1": Invert
"0": Do not invert
1
"1": Invert
Max. 39 It is the length including the separator ",".
[STX] ALC
[STX] ALC
[STX] ALC
Max. 39-byte
End code
Data contents
Setting range [mm]
"-003.000"–"+003.000"
"-001.500"–"+001.500"
"+000.000" or omit
S 10,-5.5,-2,120,0,1
R [CR]
A +010.000,-005.500,-002.000,+120.000,0,1
ME-LPGS-SR-5
(Check
End code
sum)
Remarks
• Moves the coordinate of the all
marking data in the file.
• Z-movement cannot be
specified with LP-GS051-L,
LP-RC and LP-RF series.
• The rotation center is the
center of the marking field.
It is an inversion to Y-axis.
It is an inversion to X-axis.
[CR]
[CR]
127