Siemens SIMATIC RF600 Series System Manual page 409

Accessories
10.1 Wide-range power supply unit for SIMATIC RF systems
10.1.1 Features
The wide-range power supply unit for SIMATIC RF systems is a universal compact power
supply and allows an efficient, cost-saving solution for many different mid-range power
supply tasks.
The primary switched power supply is designed for use on single-phase AC systems. The
two DC outputs (sockets) are connected in parallel and protected by a built-in current limiting
circuit against overload and short-circuits.
The device is vacuum-cast and prepared for Safety Class I applications. The EU and UK
versions satisfy the low-voltage directive as well as the current EU standards for CE
conformity. Furthermore, the US version has been UL-certified for the US and Canada.
Wide-range power supply unit for SIMATIC RF systems
10.1.2 Scope of supply
● Wide-range power supply unit for SIMATIC RF systems
● Country-specific power cable (2 m)
● Protective cover for flange outlet
● Operating Instructions
SIMATIC RF600
System Manual, 10/2016, J31069-D0171-U001-A19-7618
Characteristics
Application Supplying power to Siemens Ident
devices
Degree of protection IP67
Design features
•
•
•
①
Structure
②
③
10
Mechanically and electrically rug-
ged design
Short-circuit and no-load stability
Suitable for frame mounting
Network connector (PE)
DC output 1
DC output 2
409