Advanced Settings; Installer Access - Bosch BCC100 Installation Manual And User's Manual

Advanced Settings

Advanced Settings allow HVAC professionals the ability to modify specific thermostat settings for better control of the heating
and cooling appliance(s). In order to access the Advanced Settings of the BCC100 Thermostat, your thermostat must be
connected to Wi-Fi. The Advanced Settings section is accessible from the Menu of the BCC100 thermostat.
FOR CONTRACTORS ONLY: Advanced Settings are for professional use only and require an access code
ACCESS CODE: 1886

Installer Access

u To access the Installer Access,click Advanced Settings, enter the Professional Access Code and click Installer
u Enter any one of the Action Codes in parenthesis below to gain access to that specific setting:
Humidity Calibration (HC)
Ability to adjust humidity readings after extended product use.
Relative Humidity Hysteresis (HSD)
Adjust the set point differential for the humidity control.
Initial Setup (IS)
Initial Setup process.
Sensor Calibration (SC)
Ability to adjust temperature readings after extended use.
Sensitivity Level (SS)
The lower the level, the more your system cycles to maintain the set point(s).
Staging (ST)
Configuration options: Latching, Stage Delay and Stage Temp.
20