Initial Setup; User Account Setup; Add Device - Bosch BCC100 Installation Manual And User's Manual

Initial Setup

User Account Setup

1. After downloading the Bosch Connected Control app,
open the app on your smartphone and click the Register
button to create a new account.
2. Read and accept the Terms and Conditions and Privacy
policy, and press continue in the top right hand corner.
3. Follow the on-screen instructions to create your account
and then press OK at the bottom of the screen.
4. After a successful registration, you can use your newly
created user ID and password to log into your account.
Note: You will also receive a confirmation email from the
Bosch Team confirming your account creation.

Add Device

1.
After signing into your account, click the plus sign (+) in the
top right hand corner to add a new device.
2.
On the next screen, click the device you would like to add,
in this case the BCC100.
3. Return to your thermostat and click Ok to initiate the Initial
Setup.
Note: If you skip this step, you will be required to repeat the
initial setup in the future to make any changes or
adjustments to the thermostat settings.
4.
Follow the on-screen instructions to name your thermostat
and connect your smartphone to the device.
5.
If your thermostat is unable to connect to the app, follow
the on-screen instructions.
Add Device
Device Name
BOSCH x
Device MacID
1234
Temporary Verification Code
For Automatic Entry (Recommended):
Scan QR code found in "Wi-Fi settings" screen
For Manual Entry:
Enter MacID and temporary verification code.
MacID can be found on device label, package,
or "Wi-Fi settings" screen. Temporary verification
code can be found on the Wi-Fi settings screen
on your thermostat.
OK
MAC ID and Temporary
Verification Code
You can find the MAC ID and
Temporary Verification Code by
navigating to the Wi-Fi Settings
screen on your thermostat and
clicking the Registration button.
11