Advanced Settings - Bosch BCC50 User Manual

Advanced Settings

Advanced Settings allow HVAC professionals
the ability to modify specific thermostat
settings for better control of the heating and
cooling appliance(s). In order to access the
Advanced Settings of the BCC50
Thermostat, your thermostat must be
connected to Wi-Fi. The Advanced Settings
section is accessible from the Menu of the
BCC50 smartphone app.
NOTE: Advanced Settings are for
professional use only and require
access code: 1886
16
Advanced Settings
Heating & Cooling
To access the Hveating and Cooling, click Heat – Cool on the Advanced Settings screen and enter the
u
Professional Access Code.
Click on a setting and use the scroll wheel to modify the default value. From this menu you can adjust:
u
TITLE Default Max Min Description
The fan's lag time after the heating or cooling call is initiated when in Fossil Fuel, Heat Pump, or
Fan Delay On
Cooling operation.
The fan's lag time after the heating or cooling call is initiated when in Electric, Auxiliary, or
Fan Delay On Elec
Emergency operation.
Fan Delay Off The fan's lag time after the heating or cooling call is terminated.
Min. Run Time The minimum amount of time the system will cycle upon engagement.
The Anti Short Cycle (ASC) timer represents the minimum amount of time the system will remain
Anti Short Cycle
off upon stage down engagement.
Cycle Time Time delay between heating and cooling transition
Zero Energy A temperature range between the current temperature and the heating set point, where heating is
Band Heating not engaged (also called deadband).
Zero Energy A temperature range between the current temperature and the cooling set point, where cooling is
Band Cooling not engaged (also called deadband).
17