Effect - Edtype (Effect Edit Type) - Yamaha A3000 Owner's Manual

EFFECT - EdType (Effect Edit Type)

Selects the effect-edit method: either "full" or "favorite."
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this page to select the method for editing at the Efct1, Efct2, and Efct3 pages ( 125).
Note that this page does not let you edit parameter values themselves. You must use the
Efct1, Efct2, and Efct3 pages to access and change the values.
Knob 1 Change Page
• Turn the knob to change to a different page within the EFFECT function. Available
• Push the knob to move to the Program/Sample Selection screen. ( 95)
EffectEditType
Knob 3
Turn the knob to select the editing method used at the Efct1, Efct2, and Efct3 pages.
Methods are as follows.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
-
pages are: EfType, Efct1, Efct2, Efct3, In&Out, and EdType (this page).
= full, favorite
full
At the edit page, you select each parameter by turning Knob 1 to
cycle through the parameter list. This method gives you rela-
tively easy access to all parameters, but may increase the time it
takes for you to locate the parameters you want to set. The "full"
edit page appears as follows.
favorite
The edit page gives you immediate access to four "favorite" pa-
rameters. This makes it very easy to edit these four parameters,
while making it slightly more complicated to access the many
other parameters. Under factory defaults, the edit page shows
the four most important (influential) parameters, although you
are free to change the "favorite" selection while working at that
page. The "favorite" edit page looks like this.
EFFECT Function
Turn Knob 1 to select EdType.
Knob 3 Knob 4
-
- -
Select P/S
Chapter 4
Knob 5
-
-
PLAY Mode
127