Yamaha A3000 Owner's Manual page 228

RECORD Function
Chapter 6 RECORDING Mode
226
• When you push Knob 2 (>STOP) or Knob 3 (>SKIP) to end the current recording and
proceed to the next, the screen display depends on whether you have selected a stop
trigger.
If you have not selected a stop trigger: The A3000 immediately returns to the standby
page and stands by to begin the next recording.
If you have selected a stop trigger (if you have set StopBy to SrcOut): The A3000
stops the recording, but continues to wait for the input level to fall below the trigger
before proceeding. In this case, the following screen appears.
If you push Knob 4 (>START), the A3000 will immediately start recording the next
sample. If you do nothing, the A3000 will wait for the level to fall below the trigger,
and will then return to the standby page.
• If you push Knob 2 (>STOP) or Knob 3 (>SKIP) while recording from an audio CD
(external CD-ROM drive), the A3000 automatically advances the CD position to the
next index number. If the playback position is currently at the last index number in
the track (or if the CD does not provide index data), the position advances to the next
track.