Siemens SITOP UPS1600 Manual page 76

Engineering and remote access
3.4 SIMATIC STEP 7
4. Select the IO controller to be loaded from the accessible modules.
This module is displayed in the "Enter connection to target station" dialog box.
5. Start loading by clicking on the "OK" button.
The IO controller is assigned the configured IP address.
Note
Ensure that the article number of the SITOP UPS1600 configured offline matches the article
number of the device connected online. The following response is obtained after loading the
configuration into the device:
Image 3-2
76
Online / offline
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76