Display And Visualization - Siemens SITOP UPS1600 Manual

Engineering and remote access
3.5 SITOP UPS Manager
Behavior for pending system alarms
Make the settings under "Software configuration > System alarms". Reasons for a system
alarm are contained in the alarms list (see Section Troubleshooting (Page 135)).
The following options exist in the "System alarms" submenu:
● Start the application if at least one system alarm is active.
● Start the application if no system alarm is active.
● Open the SITOP UPS Manager if at least one system alarm is active.
● Open the SITOP UPS Manager if no system alarm is active.
3.5.10

Display and visualization

The "Display" menu item shows information about the device data and parameters as well as
the state of the power supply.
The following display options exist:
● Active alarms
● Alarm history
● Operating data: Data and parameters of the basic device and the energy storage device
● Trend charts:
– Load current over time
– Input voltage over time
– Remaining buffer time over time
– Battery temperature over time
– Battery charge over time
– Charge current over time
● Online functions:
– Updating the firmware
Displaying pending alarms
1. Select "Display > Pending alarms".
The pending alarms are displayed in a tabular form.
106
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76