GE DMS Go Operator's Manual page 82

Chapter 2. Instrument Setup
2.4.2b Setting the Ultrasonic Detection Mode (CONFIG - TG MODE) (cont.)
3. After making your choice, use the joystick (
2.4.2c Setting the Thickness Calibration Method (PROBE & CAL - THK CAL)
In this option, you can set thickness calibration to one or two points.
In the MAIN menu, scroll to the PROBE & CAL submenu using the joystick (
1.
2. Use the joystick (
2-point.
3. After making your choice, use the joystick (
60
Your Complete Source for
Testing Equipment. Since 1969!
) to move to another function, or press HOME to return to the Main Menu.
) to select the function titled THK CAL, and then to select the method. The available choices are 1-point and
) to move to another function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com