GE DMS Go Operator's Manual page 66

Chapter 2. Instrument Setup
2.3.2i Setting the Decimal Point (CONFIG-RADIX)
.
The radix, or decimal point, is typically a period in the US, or a comma in some European countries.
Note: When utilizing the DR mode, the decimal point should not be changed, as the DR is not dynamically changed
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
comma and a period.
3. To change the radix, move the joystick.
4. After making your choice, use the joystick (
44
Your Complete Source for
Testing Equipment. Since 1969!
) to select the RADIX (the symbol for the decimal point in measurements). The available symbols are a
) to move to another function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
). Several functions are displayed on the screen.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com