GE DMS Go Operator's Manual page 129

4.3 Displaying Measured Results (MEASURE- RESULTS) (cont.)
The measured readings can be displayed at the top of the display screen in six small reading boxes and one large reading box. To set the
reading box configuration:
In the MEASURE menu, activate the RESULTS submenu using the joystick (
1.
In the RESULTS submenus, access and set the READING 1 through READING 6 functions to select the desired result to be displayed.
2.
Note: In some configurations, the DMS Go can display only four item, as shown in Figure 27 below.
Move the joystick up or down (
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
Figure 27: Sample Readings
) to navigate away from this function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 4. Measuring and Recording Data
).
101
1-847-577-3980
Info@BergEng.com