Configuring A Light-Integration Device (External Viewer); 2.10.1 Configuration Checklist - Siemens DMS8000 MP4.30 Connectivity Manual

2.10

Configuring a Light-integration Device (External Viewer)

2.10.1 Configuration checklist








38
Building Technologies
Fire Safety & Security Products
Third party units, e.g. IP cameras or other devices, can be easily integrated in
MM8000 systems for providing basic viewing functions. In fact, such devices can
be supported with a Data Viewer in the MM8000 Page Browser. No event or his-
tory treatment is foreseen.
The viewer can be either locally installed software (EXE file) or WEB based (HTML
URL).
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration checklist that follows.
ITEMS NEEDED FOR CONFIGURATION
The number of devices and the corresponding type of viewer (Application or Web-
based)
In case of application viewer:
The application (to be installed on each client station) and the corresponding folder
–
path
In case of web-based viewer:
The URL address (www....)
–
Plug-ins needed:
Plug-in #358001, which must be installed before you can configure your system.
CONFIGURING A LIGHT-INTEGRATED DEVICE
1. Add the folder(s) required to identify the location of the 3
project structure tree
2. Add the device node to the folder
3. Configure the viewer
4. Repeat steps 2 and 3 above for all the devices in the project
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
rd
party devices in the
p. 39
p. 39
p. 40
06.2010