Siemens DMS8000 MP4.30 Connectivity Manual page 13

Configuring CCTV network
Building Technologies
Fire Safety & Security Products
Fig 6 Adding video cameras
A Select this icon to add an additional camera folder
B Select this icon to add a fixed camera
C Select this icon to add a PTZ camera
D Select this icon to add a Dome camera
Setting camera options
1. Select the camera node.
2. Select the Node tab.
Note: Here you can customise the camera name (Description field).
3. Set the camera options that are illustrated in Fig 7
For MM8000 (this step is not required for MK8000), you can select:
– Manual Recording (Default) or Auto Recording. If set in automatic mode,
no manual control on video recording is available for the operator. Set this
option according to the needs of the security application.
– Motion and Sabotage Detection (available if supported by the DVR unit).
– ODR (Object detection and Removal) (if supported by the DVR unit).
– Control Settings: Pan, Tilt and Zoom control, which can be enabled ac-
cording to the camera characteristics (this is possible for dome and PTZ
cameras, whereas it is not applicable to fixed cameras).
Fig 7 Camera options
Connecting the cameras
1. Select and expand the camera node.
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
11
06.2010