S120 Combi Power Modules
4.7 Installation
Holes:
4 X Ø 4.8 mm
Screws to be used:
M4 x 10 (ISO 7045 (DIN 7965), ISO 7380, DIN EN ISO 1207, ISO 1580M4)
Tightening torques:
Initially tighten by hand (0.5 Nm), then tighten with 1.8 Nm
Installing the reinforcement plates
Insert the left reinforcement plate into the
mounting cut-out.
Screw the reinforcement plate at the top and
bottom.
92
Locate the reinforcement plate on the
mounting panel.
Insert the right reinforcement plate into the
mounting cut-out.
Manual, 11/2017, 6SL3097-4AV00-0BP7
SINAMICS S120 Combi