Siemens SINAMICS S120 Combi Manual page 187

3. Install the lower and upper DC-link busbars.
4. Install the 24 V connector (accessories pack of the component to be connected).
Figure 8-4
5. Close the protective covers of both components.
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7
Install the lower DC-link busbar
Release the screws.
•
Turn over the DC-link bridge.
•
Observe the following sequence when
•
screwing into place.
Screwdriver Torx T20 or slotted 1.2 x 6
Tightening torque 1.8 Nm
Motor Modules with 24 V connector installed
Electrically connecting Motor Modules and DC link components
8.4 Connecting an additional component
Install the upper DC-link busbar
Release the screws.
•
Turn over the DC-link bridge.
•
Observe the following sequence when
•
screwing into place.
187