X524 Electronics Power Supply - Siemens SINAMICS S120 Combi Manual

Additional system components
9.3 DRIVE-CLiQ Hub Module External DME20
9.3.3.3

X524 Electronics power supply

Table 9- 21
Type: 5-pin socket
Maximum connectable cross-section:
4 x 0.75 mm
Note
The maximum cable length for the 24 V supply of the DME20 is 100 m.
In case no UL-compliant design is required, is the use of the following cables and connectors
from Siemens is recommended:
Pre-assembled cables
Connecting cable for power supply with M12 plug and M12 socket,
A-coded, 4-pin,
Article number: 6XV1801-5D..
Cables to be assembled by the user
Cable
24 VDC cable,
2-wire, 2 x 0.75 mm
Article number: 6XV1812-8A
Table 9- 22
Connected
loads
Cross-section
0.34 mm²
2 x 0.34 mm²
0.75 mm²
2 x 0.75 mm²
T = 55 °C
a
100 m DRIVE-CLiQ
Connected motors with DRIVE-CLiQ encoder, DRIVE CLiQ mounted encoder SME
1)
220
X524: Electronics power supply
Pin Designation
1 Electronics power supply
2 Electronics power supply
3 Electronics ground
4 Electronics ground
5 Not connected
2
,
2
Cable length P24 supply cable
1
m
1)
75 m
100 m
100 m
100 m
Technical specifications
The supply voltage of 20.4 V ... 28.8 V
refers to the (terminal) voltage at the
DME20. This must be taken into account
when selecting the cable cross-section
and supply cable lengths.
Pins 1 and 2: jumpered internally
Pins 3 and 4: jumpered internally
Connector
M12 plug connector,
4-pin, A-coded,
Article number: 6GK1907-0DC10-6AA3
2 3
45 m 30 m
90 m 65 m
100 m 75 m
100 m 100 m
Manual, 11/2017, 6SL3097-4AV00-0BP7
4 5
25 m 20 m
50 m 40 m
60 m 50 m
100 m 100 m
SINAMICS S120 Combi