Pue Configuration Management - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 7-3 Setting the iCooling function
----End

7.8 PUE Configuration Management

The PUE configuration mode can be set to Standard and User-defined on the ECC800
WebUI. You can enable PUE functions and select a PUE configuration mode based on
requirements.
Feature Description



PUE Calculation Formula
Table 7-4 PUE calculation formula
Configuration
Mode
Issue 06 (2020-01-02)
 When L1/L2 is enabled, smart cooling products enter the iCooling teamwork control mode.
 When L1/L2 is enabled, the T/H threshold can only be set on the ECC800 WebUI.
 When L1/L2 is disabled, smart cooling products enter the intelligent teamwork control mode
(teamwork controlof smart cooling products).
Supports user-defined settings of the PUE and power consumption on the ECC800
WebUI (can be set by both delivery personnel and customers).
Synchronizes the PUE and power consumption calculated by the ECC800 from the
WebUI to the app, and displays the data on the app screen.
The ECC800 connects to the NetEco over a northbound port and can upload the
calculated PUE and power consumption data to the NetEco.
The PUE ranges from 1 to 3. If the PUE is greater than 3, the value is displayed as 3.
Devices Connected
Copyright © Huawei Technologies Co., Ltd.
PUE Calculation Method
7 Feature Description
167