Access Control Device - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Item
E-label
Indicators
Table 3-38
Table 3-38 ETH converter indicators
Indicator
PWR
RUN
ALM

3.3.11 Access Control Device

The aisle access control system applies to contained aisles. It monitors and collects data for
devices and personnel moving into or out of contained aisles. Diverse access control devices
such as the fingerprint and card reader with a keypad, fingerprint and card reader, and card
reader with a keypad are supported.
Issue 06 (2020-01-02)
Specifications
Supported
describes the indicators on the ETH converter.
Color Name
Green Power input
status
indicator
Green Operating
status
indicator
Red Alarm
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power supply is
abnormal.
Blinking at The ETH converter
long intervals
successfully registers with the
ECC800 and the software
runs properly (the indicator
blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at The communication fails or
short the ETH converter fails to
intervals register with the ECC800 (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is
generated.
3 Device Description
49