Setting Alarm Notification By Email And Sms - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 5-12 Container view
----End

5.7 Setting Alarm Notification by Email and SMS

Set the alarm notification by email and/or SMS as required. A maximum of 20 alarm
notification user information can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:


To implement alarm notification by email, the following conditions must be met:

Procedure
Step 1 Choose System Settings > Alarm Notification.
Step 2 Set parameters in Alarm Notification Settings, click Test to test whether the email is sent
successfully. If the email fails to be sent, check the email parameter settings; if the email is
sent successfully, click Submit.
Issue 06 (2020-01-02)
The ECC800 is configured with a 3G module into which a GSM or WCDMA SIM card
is inserted.
The SMS module is inserted into the USB port on the ECC800e and the SIM card is
inserted into the SMS module.
The ECC800 is connected to a network with mail servers through a WAN port. Both
Internet and local area network (LAN) can be used.
The ECC800 supports only SMS but not data services by using the 3G module.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
121