24
en | Setup tasks
4.
5.
6.
Step 3 - Logical Drive Summary
The Summary lists the disk array and logical drive information you specified.
To proceed with disk array and logical drive creation, click the Submit button.
4.7.4
Log out
There are two ways to log out from CIP Management GUI:
–
–
Clicking Logout brings you back to the Login Screen.
After logging out, you must enter your user name and password in order to log in again.
4.8
System shutdown
To shutdown the system, perform the normal shutdown procedure according to the Windows
operating system.
2019-10 | V01 | F.01U.380.028
–
This value is the data capacity of the first logical drive in your new disk array. If you
specify less than maximum capacity, the remaining capacity is available for additional
logical drives which you can create now or later.
For the following items, accept the defaulted values or select a new value from the
dropdown list:
–
Stripe size. 64 KB is defaulted. 64 KB, 128 KB, 256 KB, 512 KB, and 1 MB are
available.
–
Sector size. 512 B is defaulted. 512 B, 1 KB, 2 KB, and 4 KB are available.
–
Read (cache) Policy. Read Ahead is defaulted. Read Cache, Read Ahead, and No
Cache are available.
–
Write (cache) Policy. WriteBack is defaulted. WriteBack and WriteThrough (Thru) are
available.
Click the Update button. A new logical drive is displayed under New Logical Drives. If
there is free capacity remaining, you can specify another logical drive now or later.
Click the Next button.
Close your browser window
Click Logout on the Management GUI header
Quick installation guide
CIP5000 series storage
Bosch Security Systems B.V.