Table of Contents
Advertisement
10
en | Setup tasks
4
Setup tasks
Finish the basic setup tasks described in the guide.
4.1
Task 1: unpacking
Note that the two models are nearly identical, except for the number of disk drive bays.
Packing List
The box contains the following items:
–
–
–
–
–
–
4.2
Task 2: install enclosure on the rack
The instructions here apply to 3U 16-bay models CIP-5316W-00N and the JBOD expansion
CIP-5316-JBOD, as well as the 4U 24-bay model CIP-5424W-00N.
Caution!
Do not populate any enclosure hardware with hard drives until it has been securely installed
!
in the rack.
Caution!
At least two persons are required to safely lift, place, and attach the enclosure hardware into
!
a rack system.
Caution!
Do not lift or move the enclosure hardware by the handles, or power supplies. Hold the
!
system itself.
Caution!
Do not install the enclosure hardware into a rack without rails to support the system.
!
Caution!
Only a qualified technician who is familiar with the installation procedure should mount and
!
install the enclosure hardware.
Caution!
Mount the rails to the rack using the appropriate screws and flange nuts, fully tightened, at
!
each end of the rail.
2019-10 | V01 | F.01U.380.028
One of the following storage appliances:
–
CIP-5316W-00N
–
CIP-5424W-00N
Two 1.83m (6 ft) power cords
Screws for disk drives
Front panel bezel cover
Quick installation guide
(Optional) Sliding rail assembly for rack mounting
Quick installation guide
CIP5000 series storage
Bosch Security Systems B.V.
Advertisement
Table of Contents
