Table of Contents
Advertisement
14
en | Setup tasks
Figure 4.7: Drive slot numbering for 4U models
Slot numbering is mapped in the web-based system Management GUI.
Insert all of the drive carriers into the enclosure to ensure proper airflow, even if you do not
populate all the carriers with disk drives.
Caution!
Swing open the drive carrier handle before you insert the drive carrier into the enclosure.
!
4.3.2
Remove the drive carrier
The drive carrier accommodates 3.5-inch drives.
Caution!
The CIP5000 models support hot-swapping disk drives.
!
To avoid hand contact with an electrical hazard, remove only one drive carrier at a time.
Figure 4.8: Disk carrier with HDD installed (front view)
2019-10 | V01 | F.01U.380.028
1
2
5
6
9
10
13
14
17
18
21
22
Push here when returning
or replacing the carrier into
an empty drive bay.
Quick installation guide
3
7
11
15
19
23
Pull here to release the carrier handle latch.
Then pull the carrier straight out by the handle.
Place your free hand under the carrier.
Do not drop the disk carrier, even if it is empty.
CIP5000 series storage
4
8
12
16
20
24
Bosch Security Systems B.V.
Advertisement
Table of Contents
