Table of Contents
Advertisement
CIP5000 series storage
1.
2.
3.
Automatic Configuration
When you select the Automatic option, the following parameters appear on the screen:
–
–
–
If you accept these parameters, click the Submit button.
The new disk array appears in the Disk Array List on the Information tab.
If you do not accept these parameters, use the Express Configuration or Advanced
Configuration to create your logical drive.
Express Configuration
When you select the Express Configuration option, a set of characteristics and options
appears on the screen.
Bosch Security Systems B.V.
Log into the Management GUI. If there are no arrays configured, you will be automatically
directed to the Disk Array Configuration menu.
The Disk Array Configuration menu offers three options for configuration. Select one of
the options:
–
Automatic Configuration - Create a new disk array as defaulted set of parameters.
Create one logical drive automatically, and create a hot spare drive for all RAID levels
except RAID 0, if at least four un-configured physical drives are available.
–
Express Configuration - You select the parameters for a new disk array by specifying
the characteristics you want. You can create multiple logical drives at the same time,
even they are identical. You can select to create a hot spare drive for all RAID levels
except RAID 0, if at least four un-configured physical drives are available.
–
Advanced Configuration - You directly specify all parameters for a new disk array.
Create one logical drive automatically. You can create additional logical drives at a
later time if additional configurable capacity is available. This option does not create
a hot spare drive.
Click the Next button.
Disk Arrays - The number of physical drives in the disk array, their ID numbers,
configurable capacity, and the number of logical drives to be created.
Logical Drives - The ID number of the logical drive(s), their RAID level, capacity, and
stripe size.
Spare Drives - The physical drive slot number of the dedicated hot spare drive assigned
to this disk array. A hot spare drive is created for all RAID levels except RAID 0, when five
or more un-configured physical drives are available.
Quick installation guide
Setup tasks | en
21
2019-10 | V01 | F.01U.380.028
Advertisement
Table of Contents
