Reconfigurations which must be linked to the DRIVE-CLiQ slave with message "Timing
change" are
● Changes to the DRIVE-CLiQ clock cycle for the component.
● Changes to oversampling settings which require internal reconfiguration of the time-slice
Please also note the following:
● Changes to component connections and longer cables between components require
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
system.
adjustments to signal propagation delays and therefore also change the timing.
12.11 Emergency operating mode for DRIVE-CLiQ components
Basic information about the drive system
907