Panasonic Eco Solutions Nordic AB
MEW01622
Rev: -
16.2
16.2.1
16.2.2
16.2.3
EBLWin Control unit pop-up menu
Some commands might be disabled since you have to connect and log
on to the control unit to be able to select / use them.
Reset alarm counter
The control unit has an alarm counter that can be reset if required.
(Level 2, i.e. a special access code is required.)
Software version
The control unit software (S/W) version will be displayed.
Show event log
Three different event log lists, Alarm (500 events), Interlocking (500
events) and General log (500 events) can be shown.
130
EBL128 Planning Instructions V2.0.x