Installing Option Modules; Mounting Locations Of Option Modules; Figure 5-8 Mounting Locations Of Option Modules - Siemens SIPROCESS GA700 Operating Instructions Manual

Installing/removing modules in the rack-mounted enclosure

5.5 Installing option modules

5.5 Installing option modules
5.5.1

Mounting locations of option modules

Features
Information on option module features with inputs and outputs is available in the section
Technical Specifications, see Table 11-4 Rack-mounted enclosure: Option modules
(Page 125).
Mounting locations
The rack-mounted housing has been prepared for the installation of up two option modules. If
option modules are not installed at the intended mounting locations, the openings on the rear
are closed off with blank plates.
Install option module OM 1.1 at mounting location
at mounting location
①
Figure 5-8
See also
Technical specifications of rack-mounted housing (Page 124)
76
②
.
Mounting location OM 1.1
Mounting locations of option modules
①
, and option module OM 2.1 or OM 2.2
②
Mounting location OM 2.1 or OM 2.2
Operating Instructions, 05/2015, A5E31874006-03
Rack-mounted device