Siemens SINUMERIK 840 User Manual page 41

1 Introduction
1.9.2 Logging via CP315 with the SINUMERIK 840/880
– Specification of location of tolerance violation
Option
Code:
(@O * SS * X )LF
– Definition of perpendicular lines of the table frame
The table frame must be input including blanks
Code:
(@R * ZZ * SS
– Description of table variables
Code:
(@T * Z * SS @Rxxx * Fyy.z )LF
– Definition of time of day
Code: see above
The variables of the basic line and all possible supplementary lines must be defined one.
First define all variables of the basic line, then those of the first supplementary line etc.
• Part 5
Part 5 consists of the end identifier for form description.
Code:
(@E)LF
1–32
ASCII representation of tolerance violation identifier.
Presetting: " "
*
Column No.
Identifier for tolerance violation
| | | | )LF
Table frame as a fixed text
Column No.
Line No.
Identifier for table frame
Output format
yy = Total number of decimal places
z = Number of places after the decimal point
No. of R parameters to be logged, e.g. R 219
Column No.
Assignment to basic or supplementary line
0 = Basic line
1 = 1st supplementary line
.
.
8 = 8th supplementary line
Identifier for description of table variables
End identifier
©
Siemens AG 1990 All Rights Reserved
10.91
max. 3 digits
6FC5197- AB70
SINUMERIK 840/850/880 (BN)