Siemens SINUMERIK 840 User Manual page 211

01.93
4. You position the workpiece probe close to and opposite the defined setpoint
X
surface by operating the JOG direction keys.
Z
X
Spindle chuck
M W
Z
MW
Measuring the workpiece in JOG mode
5. The measuring function is activated once the softkey MEASURE has been
MEASURE
operated. If incorrect values are entered, alarm 3050, "WRONG INPUT" is
displayed. The dialog text MEASURING ACTIVE is displayed.
The displayed softkey function STORE is not enabled until the workpiece
probe has been deflected
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
7 Measuring in JOG Mode (SINUMERIK 880/880 GA2)
Calibrated
Z
PF
Operator positions the
workpiece probe opposite
the surface for measuring
Workpiece
200
6FC5197- AB70
7.2.1 Operating and function sequence
F
X
PF
Z
7–11